NSK RNA4938 Needle bearing

A5:16 mm; L:91 mm; L1:58 mm; H:65 mm; T min.:-20 °C; G1:M16; s1:11 mm; B:22 mm; SW:2.38 mm; L3:38 mm;

Ship Weight:0.2 LB; UPC:782476503925; Brand:Baldor-Dodge; Bearing Duty:Medium Duty; Manufacturing Plant Location:Crossville, TN - DC;

B:74.6 mm; J:203 mm; N1:28 mm; T min.:-20 °C; L1:77 mm; Designation of housing:PE214-; S:30.2 mm; s1:37.3 mm; H1:27.5 mm; L:260 mm;

S:12 mm; L:162 mm; A2:61.4 mm; B1:48.4 mm; d1:74.5 mm; A1:18 mm; A:43 mm; s1:36.95 mm; Weight:3.07 kg; B:32.5 mm;

A:40 mm; Dz:100 mm; Designation of open end cover:SCO210-45; N:16mm; Weight:2.75 kg; d:45 mm; s1:27.5 mm; Adapter sleeve reference:H2310; T max.:100 °C; e:22 mm;

D1:467.4 mm; Y2:2.94; Dynamic load, C:4,880 kN; Characteristic outer ring frequency, BPF0:8.56 Hz; da min:320 mm; Fatigue limit load, Cu:352 kN; D:540 mm; Radial clearance class:CN; Min operating temperature, Tmin:-40 °C; Static load, C0:6,880 kN;

Manufacturer Name:NTN; Min operating temperature, Tmin:-20 °C; Dc1:42 mm; Category:Roller Bearings; Bearing ring (outer ring) GS:GS81105; Weight / Kilogram:0.025; Lw:5 mm; Characteristic outer ring frequency, BPF0:6.5 Hz; EAN:4547359094824; Ea:38.7 mm;

Designation of bearing:UC207-21G2; d:33.34 mm; H2:140 mm; H1:19 mm; T max.:100 °C; N:17mm; Designation of housing:PH207N-; N1:21 mm; B:42.9 mm; Recommended tightening torque for set screw:8 Nm;

A:31 mm; A5:32.6 mm; C:35.1 kN; SW:4.76 mm; L1:260 mm; Weight:3.92 kg; G:R1/8"; B:51.6 mm; H2:61 mm; T max.:100 °C;

Designation of open end cover:SCOU210-31; H:57.2 mm; Designation of bearing:UC210-31G2L4; A:60 mm; E:25 mm; C0:23.2 kN; S:19 mm; d:49.21 mm; Designation of housing:PG210N-; Recommended tightening torque for set screw:16.8 Nm;

Retainer Type:Std Retainer; Ball Grade:Class 10; UPC:782475900237; Base to Center Height:Not Applicable; Grease Type:Unirex N2; Bearing Duty:Normal Duty; Manufacturing Plant Location:Rogersville, TN; Self Aligning:Self Centering; Ball Bearing Housing Series:206 Series; Bearing Insert Material:Steel;

B1:43.5 mm; Recommended tightening torque for set screw:5.5 Nm; C:12.8 kN; T min.:-20 °C; C0:6.65 kN; L:127 mm; d1:32.4 mm; H1:15 mm; B:34 mm; Designation of housing:P204-;

d:49.21 mm; Recommended tightening torque for set screw:16.8 Nm; L:145 mm; H:110 mm; B:51.6 mm; T max.:100 °C; L3:46 mm; C:35.1 kN; A5:32.6 mm; Weight:1.82 kg;

Dz:70 mm; C0:11.2 kN; A1:13 mm; s1:34.1 mm; Recommended tightening torque for set screw:11.5 Nm; T min.:-20 °C; Designation of housing:FL206N-; N:16mm; T max.:100 °C; d:30 mm;

Y0:0.99; Min operating temperature, Tmin:-40 °C; r1a max:3.3 mm; T:30.16 mm; Dynamic load, C:84.5 kN; Mass:0.62 kg; Nlim (grease):5,500 rpm; Fatigue limit load, Cu:12 kN; ra max:0.8 mm; Rating life coefficient, A2:1.9;